09 390 1000 Get Free Quote
Home › Advice › What is KNX?

What is KNX, and is it worth it for an Auckland new build?

What KNX is, what it can run in a new home, and how to decide whether it earns its place in your build.

KNX is an open, worldwide standard for home and building automation: lighting, heating and cooling, blinds, security and more all talk to each other over one wired network. For an Auckland new build it is usually worth it if you want the whole house to work as one system for the long term, and the time to decide is before the walls are closed, because that is when the wiring goes in.

If you only want a couple of blinds to go up and down on their own, it is more than you need. The rest of this post is about telling those two situations apart.

What KNX actually is

A KNX home has a dedicated control cable, called the bus, run alongside the normal power wiring. Switches, sensors, blind and curtain controllers, lighting dimmers and heating controls all connect to that bus and send each other short messages. A wall switch does not have to be wired to the light it controls; it is programmed to control it, and that can be changed later without opening the wall.

Because KNX is a standard rather than one company's product, devices from many different manufacturers work together on the same bus. That is important in a house you plan to live in for the long term. If a switch or controller needs replacing down the track, you are not locked into a single maker or a product range that may no longer exist.

What it can run in a home

We design and program KNX for the whole house: lighting, heating and cooling, security, audio-visual, energy monitoring, and of course blinds and curtains. The value is in how they work together. One button by the front door can turn off the lights, close the blinds and set the heating when you leave. A west-facing lounge can have its blinds close when the afternoon sun arrives, whether or not anyone is home.

You can also control it from Amazon Alexa, Google Home and Apple HomeKit, so voice and phone control sit on top of normal wall switches rather than replacing them. Guests and grandparents can still just press a switch.

Why a new build is the right moment

KNX is wired, so it is best planned while the framing is open, with your builder and electrician involved. Running the bus cable and putting cabling to each window that will have a motorised blind or curtain is straightforward at pre-wire stage. Doing the same thing after the plasterboard is up is slower, messier and more limited.

Our part is the design and the programming. Your electrician does the wiring, and we work with them so the cable goes where the design needs it. The ideal time to talk to us is when you have floor plans and an electrical plan, before the pre-wire is booked.

When it is worth it, and when it is not

It tends to be worth it when you want lighting, climate and window coverings to work together, when the house has a lot of glazing to manage, and when you are building to stay rather than to sell. It also makes sense if you like the idea of adding to the system over time without rewiring.

It is harder to justify if all you want is a few motorised blinds on high or hard-to-reach windows. A standalone motorised blind does that job well, and our guide to whether motorised blinds are worth it covers which windows earn one. See also our motorised blinds page.

There is a middle path too. Some owners have the bus and window cabling installed during the build, start with blinds and a few key lighting scenes, and add more later.

What it costs

Whole-home KNX is quoted per home after a free visit, because the price depends on the size of the house and what you want automated. The window coverings are priced in the usual way: a roller blind starts from $175 for a standard 1.8 x 1.5 m window, and motorisation from $150 per window, rising with blind size. Our blinds cost guide has the detail.

For more on the automation side, including lighting and climate, see our home automation page.

Questions about this

Can I add KNX to an existing home?

Sometimes. What can be added depends on the existing wiring, and we assess that at the free visit. It is far simpler in a new build, before the walls are closed.

Do I still need an electrician?

Yes. We design and program the KNX system, and your electrician does the wiring. We work with them, and with your builder, so it is planned properly from the start.

Can I control KNX from Amazon Alexa, Google Home or Apple HomeKit?

Yes. You can control the system from Amazon Alexa, Google Home and Apple HomeKit, as well as from normal wall switches.

How much does KNX cost for a new build?

It is quoted per home after a free visit, because it depends on the size of the house and what you want automated. The visit and quote cost nothing and there is no obligation.

Is KNX only for blinds and curtains?

No. It can run lighting, heating and cooling, security, audio-visual and energy monitoring as well as blinds and curtains, all on one system.

Free in-home visit and quote

No minimum and no obligation. Bring your plans and we will go through what is worth automating in your build. We install across Auckland, from Pokeno to Orewa, and in Hamilton and the Waikato.

Related